IEI Technology HTB-100-HM170, User Manual

Page: 119 / 131

HTB-100-HM170 Medical Box PC
Page 105

Electric shocks can occur
if the HTB-100-HM170 chassis is opened when it
is running. To avoid risk of electric shock, this device must only be connected
to a supply mains with protective earth.

Do not drop or insert any objects
into the ventilation openings of the
HTB-100-HM170.

If considerable amounts of dust, water, or fluids enter the device
, turn off
the power supply immediately, unplug the power cord, and contact the
HTB-100-HM170 vendor.

DO NOT
:
o
Drop the device against a hard surface.
o
In a site where the ambient temperature exceeds the rated temperature
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
HTB-100-HM170 may result in permanent damage to the
HTB-100-HM170 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the HTB-100-HM170. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the HTB-100-HM170 is opened and any of the electrical
components are handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband
: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.

Self-grounding
: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.

Use an anti-static pad
: When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.