IEI Technology HDC-502E, User Manual

Page: 18 / 40

HDC-502E Video Capture Card
Page 11
2.4 SDI Device Installation
Various devices can be connected to the HDC-502E. Video input and video output are all
supported. Follow the steps below to connect devices to the HDC-502E.
Step 1: Insert the SDI cable connector into the SDI port on the HDC-502E. Make sure
the connection is secure.
Step 2: Connect the other end of the SDI cable to the device. Make sure the connection
is secure.
Step 3: Repeat steps 1 and 2 until all devices are connected. Step 0:
Figure 2-2: Connecting SDI Devices to the Video Capture Card