IEI Technology HDC-3X SERIES, User Manual

Page: 45 / 62

HDC-3x Series Video Capture Card
Page 37
4.1 HDCapture Overview
The HDCapture application is a video capture tool that allows user to capture video
through the HDMI input ports in Windows environment. The HDCapture application also
includes decoding function that decodes the video signal for video output to the
HDMI-enabled display device.
NOTE:
If there is a problem launching the HDCapture application in a 64-bit
Windows 7 operating system, right-click the HDCapture application
from the Windows Start menu and select Run as administrator .
4.2 Video Capture
To use the HDCapture to capture video, follow the steps below. If the older version of the
HDCapture is already installed, please refer to Section 4.5 to uninstall it.
Step 1: Launch the HDCapture. The Device Setting on the right side panel of the
HDCapture is varied based on the installed video capture card as shown in
Figure 4-1 . The best resolution to view HDCapture is 1280 x 1024 or above.