IEI Technology HDC-301MS-R10, User Manual, Page: 30 / 40

Page 22
HDC-301MS Video Capture Card
Figure 4-6: IEI HD Capture AP
Step 3: The Encode Setting window appears ( Figure 4-7 ). Make necessary
configuration setting by following the guideline below:

Audio
o
Enable: check to enable the audio encoding
o
Sample Rate: select the sample rate of the audio
o
Volume: select the volume amount for encoding

Video
o
Input Resolution: select a video input resolution which depends on the
video device.
o
Encode Resolution: select an encoding resolution. The encoding
resolution selected here must be same with the one selected in the Input
Resolution.
o
Encode Bit Rate: select a video encoding bitrate