IEI Technology GRAND-BDE Series, User Manual

Page: 24 / 60

GRAND-BDE Series
Page 16
3.3 Memory Module Installation
The GRAND-BDE has four memory slots and supports DDR4 RDIMMs and UDIMMs. To
install a memory module, follow the steps below:
Step 1:
Turn off the GRAND-BDE. Disconnect the power adaptor, network cable(s), and
any other connectors or cables from the GRAND-BDE.
Step 2: Put on an antistatic wrist strap to prevent electrostatic discharge. The crocodile
clip should be connected to the ground.
Step 3: Loosen the 2 screws on the rear of the GRAND-BDE as shown below.
Step 4: Pull the handle outwards to remove the motherboard drawer.
Step 5: Release the ejector clips gently by pulling them out of the sides of the RAM slot.
Step 6: Grip the new RAM on the edges to avoid touching contacts or circuitry on the
module.