IEI Technology GRAND-BDE Series, User Manual

Page: 37 / 60

GRAND-BDE Series
Page 29
WARNING:
The following instructions should only be performed by an authorized and
trained technician.
Before starting, please ensure that you turn off the GRAND-BDE, disconnect
the power adaptor, network cable(s), and also remove any other device/cable
that is attached to the server.
Take Anti-Static precautions whenever maintenance is being carried out on
the system components. Failure to take anti-static precautions can cause
permanent system damage. For more details on anti-static precautions,
please refer to
Section 3.1 .
4.1 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or external
components of the GRAND-BDE storage server other than those listed below.
If any other components fail or need replacement, contact the IEI reseller or
vendor you purchased the GRAND-BDE from or contact an IEI sales
representative directly. To contact an IEI sales representative, please send an
email to
sales@ieiworld.com .
The industrial server components listed below can all be replaced if they fail:

SO-DIMM module (see Section 3.3 )

Expansion card (see Section 3.4 )

Internal hard disk drive (see Section 3.5 )

Power supply unit