IEI Technology GeniSPOT, User Manual, Page: 47 / 71

GeniSPOT Screen Calibration Kit
Page 35
Figure 5-12: Top-Right Block
Step 8: The Uniformity Test window appears again. The results of the uniformity test
are shown. Click S
AVE TO
HTML to save the results to another HTML file (this is
in addition to the HTML file automatically saved for every test). Click OK to leave
the Uniformity Test window. S te p 0 :
5.4 Luminance Test
The luminance test tests the ability of the monitor to correctly produce different levels of
brightness. The test gradually moves from a black screen, through shades of gray, to a
fully white screen.
To perform the luminance test, follow these steps:
Step 1: Click Luminance Test in the main window. The luminance test starts
automatically.
Figure 5-13: Luminance Test
Step 2: The luminance test window appears. The luminance test window shows criteria
for the test and the results of the test. Click R
UN
T
EST
to continue.