IEI Technology FLEX-BX200AI User Manual Download Page 93

Page: 93 / 131

FLEX-BX200AI

Page 77

Step 4:

Plug the system into a monitor and check to see if anything appears on the

screen. If the boot-up screen appears it means the power LED has failed. To fix

this problem, contact an IEI sales representative directly.

Step 0:

5.2.2

The System Doesn’t Boot Up

If the system doesn’t boot up please do the following:

Step 1:

Check the power is turned on. See Section

836H836H670H

5.2.1 above.

Step 2:

Make sure the SO-DIMM modules are properly installed.

Step 0:

5.2.3

More Troubleshooting

Nothing appears on the monitor after booting up the system

: Make sure the monitor

is properly connected to the system and the monitor is connected to a power supply and

turned on.

WARNING!

If all troubleshooting measures have been taken and the system still

fails to start, contact the IEI reseller or vendor you purchased the

FLEX-BX200AI from or contact an IEI sales representative directly. To

contact an IEI sales representative, please send an email to

301H301H256H

[email protected]

Summary of Contents for FLEX-BX200AI




































































































































Search results

Summary of Contents for FLEX-BX200AI

Reviews:

Related manuals for FLEX-BX200AI

Brands by name

Popular brands

IEI Technology FLEX-BX200AI, User Manual

Search results

Summary of Contents for FLEX-BX200AI

Reviews:

Related manuals for FLEX-BX200AI

Brands by name

Popular brands