IEI Technology FLEX-BX200AI, User Manual

Page: 29 / 131

FLEX-BX200AI
Page 13
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
FLEX-BX200AI may result in permanent damage to the FLEX-BX200AI
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER series motherboard and the power module. (Dry climates are
especially susceptible to ESD.) It is therefore critical that whenever the FLEX-BX200AI is
opened and any electrical component handled, the following anti-static precautions are
strictly adhered to.
 Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad : When configuring the FLEX-BX200AI, place it on an
anti-static pad. This reduces the possibility of ESD damaging the
FLEX-BX200AI.
3.2 Installation Precautions
During installation, be aware of the precautions below:
 Read the user manual : The user manual provides a complete description of
the FLEX-BX200AI, installation instructions and configuration options.
 DANGER! Disconnect Power : Power to the FLEX-BX200AI must be
disconnected during the installation process. Failing to disconnect the power
may cause severe injury to the body and/or damage to the system.
 Qualified Personnel : The FLEX-BX200AI must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs