IEI Technology EP-308A, User Manual, Page: 18 / 102

EP-308A POS
Page 8
WARNING:
When installing the EP-308A, make sure to:
ƒ
Turn the power off
: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
ƒ
Only let certified engineers change the hardware settings
:
Incorrect settings can cause irreparable damage to the product.
ƒ
Install the monitor with assistance
: The product is very heavy and
may be damaged by drops and bumps. Two or more people should
install the panel PC.
ƒ
Take anti-static precautions
: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1:
Unpack the flat panel PC
Step 2:
Check all the required parts are included
Step 3:
Install the hard drive (optional)
Step 4:
Install the CompactFlash® card (if not included)
Step 5:
Install the printer paper
Step 6:
Connect peripheral devices to the bottom panel of the flat panel PC
Step 7:
Connect the power cable
Step 8:
Configure the system
2.1 Unpack the Panel PC
To unpack the flat panel PC, follow the steps below: