manualshive.com logo in svg

IEI Technology EP-308A, User Manual, Page: 12 / 102

Share
Download
IEI Technology EP-308A User Manual Download Page 12

 

 

EP-308A POS 

Page 2 

1.1 Overview 

 

Figure 1-1: EP-308A 

The EP-308A is a Mini POS with a built-in thermal printer. The EP-308A has an 8" monitor 

and a 1.6GHz Intel® Atom processor. 

Storage needs are met by installing a SATA hard drive or a CompactFlash® card. 

CompactFlash® cards with Windows CE 6.0, Windows XPE or Linux are also available. 

Wireless networking is enabled through an optional 802.11b/g wireless adapter. With 

serial ports and USB ports for peripherals and a Gigabit Ethernet slot for networking. 

1.2 Features 

Some of the standard features of the EP-308A flat panel PC include: 

ƒ

  Fully self-contained, only power from the external power supply required 

ƒ

 Wireless 

LAN 

ƒ

 Gigabit 

Ethernet 

ƒ

  IP64 compliant front cover 

ƒ

 RoHS 

compliant 

1.3 Front Panel 

The front side of the EP-308A is a flat panel LCD screen surrounded by a frame. 

Summary of Contents for EP-308A







































































































Reviews:

No comments