IEI eMerge™ MicroNode
Extreme QuickStart
Connecting Power
For Power over Ethernet (PoE)
The MicroNode requires PoE to conform to the IEEE 802.3af standard. This provides nominal
48 VDC at a maximum of 400mA. With PoE, no external power supply is needed.
For an External Power Supply
The MicroNode requires 12 VDC 2 Amp power supply. With external power supply, no PoE is
needed. The power supply must be located no further than 50 feet from the MicroNode.
RJ-45 network
connector
12 VDC
input
RJ-45 network
connector
12 VDC
input
Bottom Board topside. Bottom Board Underside
NOTE
:
PoE total power available for external 12V output is 500 mA (6 watts).
NOTE
: 12VDC power supply total power available for external 12V output is 1100 mA (13 watts).
