manualshive.com logo in svg

IEI Technology eKINO-945GSE, User Manual, Page: 98 / 215

Share
Download
IEI Technology eKINO-945GSE User Manual Download Page 98

 

 

eKINO-945GSE Motherboard 

Page 82 

5.9.5 Parallel Port Cable without Bracket 

The optional parallel port (LPT) cable respectively connects the on-board LPT 26-pin box 

header to an external LPT device (like a printer). The cable comprises a 26-pin female 

header, to be connected to the on-board LPT box-header, on one side and on the other 

side a standard external LPT connector. To connect the LPT cable, please follow the 

steps below. 

Step 1: 

Locate the connector

. The LPT connector location is shown in 

Chapter 4

. 

Step 2: 

Align the connectors

. Correctly align pin 1 on the cable connector with pin 1 on 

the eKINO-945GSE LPT box-header connector. See 

Figure 5-10

. 

Step 3: 

Insert the cable connectors

. 

Once the cable connector is properly aligned with 

the 26-pin box-header connector on the eKINO-945GSE, connect the cable 

connector to the on-board connector. See 

Figure 5-10.

 

 

Figure 5-10: LPT Cable Connection 

Step 4: 

Attach the LPT connector to the chassis

. To secure the LPT interface 

connector to the chassis please refer to the installation instructions that came 

with the chassis. 

Summary of Contents for eKINO-945GSE
























































































































































































































Reviews:

No comments