IEI Technology ECW-281B-BTi, User Manual

Page: 49 / 135

ECW-281B-BTi Embedded System
Page 35
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the bottom panel of the system and tighten until the screw
shank is secured against the bottom panel (
5
Figure 3-24
).
Step 7:
Align the mounting screws on the ECW-281B-BTi bottom panel with the
mounting holes on the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the ECW-281B-BTi rests securely in the slotted holes (
765
Figure
3-24
). Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 3-24: Mount the Embedded System