IEI Technology ECN-780-Q67, User Manual

Page: 36 / 184

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 23
S te p 2:
Align the DVI connector . Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3:
Insert the DVI connector . Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the ECN-780-Q67. See Figure 3-12.
Figure 3-12: DVI Connector
S te p 4: Secure the connector. Secure the DVI connector from the digital display device
to the external interface by tightening the two retention screws on either side of
the connector.
3.8.3 HDMI De vic e Co n n e c tio n
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the ECN-780-Q67, follow the
steps below.
S te p 1: Locate the HDMI connector . The location is shown in Chapter 1 .