manualshive.com logo in svg

IEI Technology ECK-3699GH, User Manual, Page: 91 / 181

Share
Download
IEI Technology ECK-3699GH User Manual Download Page 91

 

ECK-3699GH Embedded System

 

ACPI Version Features [ACPI v2.0] 

Use the 

ACPI Version Features 

option to enable the ACPI

 

(Advanced Configuration and 

Power Interface) features. By enabling this feature the system RSDP (Root System 

Description Pointer) is able to obtain physical addresses for other 64-bit fixed system 

description tables.   

 

ACPI v2.0 

D

EFAULT

 

ACPI version 2.0 is enabled. 

 

ACPI APIC Support [Enabled] 

Use the 

ACPI APIC Support 

option to add a pointer to an ACPI APIC table in the RSDT 

(Root System Description Table). The RSDT is an array of pointers that direct the system 

to the physical addresses of other description tables. The RSDT is the main ACPI table. 

The RSDP is located in low memory space of the system and provides the physical 

address of the RSDT. The RSDT itself is identified in memory because it starts with the 

signature "RSDT."

 

 

Disabled 

 

Pointers to the APIC APIC table are not be provided in the 

RSDT 

 

Enabled D

EFAULT

 

Pointers to the APIC APIC table are provided in the RSDT

5.3.7 MPS Configuration 

Use the 

MPS Configuration

 menu (

BIOS Menu 11

) to select `he multi-processor table. 

 

Page 91

 

Summary of Contents for ECK-3699GH






















































































































































































Reviews:

No comments