manualshive.com logo in svg

IEI Technology ECK-3699GH, User Manual, Page: 14 / 181

Share
Download
IEI Technology ECK-3699GH User Manual Download Page 14

 

ECK-3699GH Embedded System

1.1 ECK-3699GH Embedded System Overview 

 

Figure 1-1: ECK-3699GH KINO Series Embedded System 

There are three KINO series based embedded solutions in the ECK-3699G series. All 

motherboards have been optimized

 for multimedia applications that require minimum 

installation space. The KINO series boards support a full range of functions for an 

AT/ATX-compatible industrial computer.

 

1.1.1 ECK-3699GH Benefits 

The ECK-3699GH embedded system has the following benefits: 

 

Easy installation saves installation time 

 

Complete integration saves solution development time and cost 

 

Compact size saves space 

 

Powerful preinstalled Intel Pentium 4 / Celeron D CPU and motherboard 

ensures rigorous processing needs can be met 

1.1.2 ECK-3699GH Features 

The ECK-3699GH has the following feature: 

 

RoHS compliant design  

 

Built-in DC-to-DC power converter  

 

Intel® Pentium 4 / Celeron D CPU support  

 

Two 6cm ball bearing system fan 

 

Supports one 2.5” HDD 

 

Page 14 

 

IEI® Technology, Corp

.

 

Summary of Contents for ECK-3699GH






















































































































































































Reviews:

No comments