manualshive.com logo in svg

IEI Technology ECK-3699GH, User Manual, Page: 138 / 181

Share
Download
IEI Technology ECK-3699GH User Manual Download Page 138

 

ECK-3699GH Embedded System

Step 9: 

Click 

OK 

to continue. A driver files location menu window appears. Click

 

N

EXT

 to 

continue. The driver is installed.

Step 0:

 

6.5 SiS SATA RAID Utility Installation 

 NOTE: 

The SATA RAID driver has to be installed in the SATA RAID mode. 

To install the 

SiS SATA RAID Utility

, please follow the steps below. 

Step 1: 

Select 

SATA RAID

 from the SIS Solution CD driver menu. 

Step 2: 

A new window appears. Navigate to the 

SATA RAID\Windows

 (or other 

appropriate OS) sub-folder to view the folder contents on the CD for the 

SiS 

SATA RAID Utility

 (

Figure 6-38

). 

 

Figure 6-27: CD 6-SATA RAID\Windows Folder 

Step 3: 

Double-click the 

setup.exe

 file to begin the driver installation process. 

Step 4: 

The “

Starting InstallShield Wizard

” in 

Figure 6-39 

appears. 

 

Page 138 

 

IEI® Technology, Corp

.

 

Summary of Contents for ECK-3699GH






















































































































































































Reviews:

No comments