IEI Technology DRPC-242-ADL-P Series Page 29 User Manual Download

Page: 29 / 167

DRPC-242-ADL-P

Page 13

2.3

Unpacking Checklist

NOTE:

If some of the components listed in the checklist below are missing, please do not

proceed with the installation. Contact the IEI reseller or vendor you purchased the

DRPC-242-ADL-P Series from or contact an IEI sales representative directly. To

contact an IEI sales representative, please send an email to

[email protected]

The DRPC-242-ADL-P Series is shipped with the following components:

Standard

Quantity

Item and Part Number

Image

DRPC-242-ADL-P Series

DIN-Rail mounting kit

Chassis screws

Summary of Contents for DRPC-242-ADL-P Series








































































































































































Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands

IEI Technology DRPC-242-ADL-P Series, User Manual

Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands