IEI Technology DRPC-242-ADL-P Series, User Manual, Page: 138 / 167

DRPC-242-ADL-P
Page 122
➔ Auto Power Button Function [Disabled(ATX)]
The Auto Power Button Function BIOS option to show the power mode state is ATX
➔ Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system when the power mode is ATX.
➔
Power Off The system remains turned off
➔
Power On The system turns on
➔
Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
➔ Power Saving Function (EUP) [Disabled]
Use the Power Saving Function (EUP) BIOS option to enable or disable the power
saving function.
➔
Disabled D
EFAULT
Power saving function is disabled.
➔
Enabled Power saving function is enabled. It will reduce power
consumption when the system is off.
➔ USB Power SW1 [+5V DUAL]
Use the USB Power SW1 BIOS option to configure the USB power source for the
corresponding USB connectors (Table 5-1).
➔
+5V DUAL D
EFAULT
Sets the USB power source to +5V dual
➔
+5V Sets the USB power source to +5V
➔ USB Power SW2 [+5V DUAL]
Use the USB Power SW2 BIOS option to configure the USB power source for the
corresponding USB connectors (Table 5-1).
➔
+5V DUAL D
EFAULT
Sets the USB power source to +5V dual
➔
+5V Sets the USB power source to +5V