IEI Technology DRPC-242-ADL-P Series Page 131 User Manual Download

Page: 131 / 167

DRPC-242-ADL-P

Page 115

5.4.1.2 Graphics Configuration

Use the

Graphics Configuration

(

BIOS Menu 29

) menu to configure the video device

connected to the system.

BIOS Menu 29: Graphics Configuration

➔

Primary Display [Auto]

Use the

Primary Display

option to select the primary graphics controller the system uses.

The following options are available:

▪

Auto

Default

▪

IGFX

▪

PEG

▪

PCI

▪

➔

Internal Graphics [Enabled]

Use the

Internal Graphics

option to configure whether to keep IGFX enabled. If user

wants to support dual display by internal graphics and external graphics, this Internal

Summary of Contents for DRPC-242-ADL-P Series








































































































































































Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands

IEI Technology DRPC-242-ADL-P Series, User Manual

Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands