IEI Technology DRPC-242-ADL-P Series, User Manual, Page: 120 / 167

DRPC-242-ADL-P
Page 104
➔ CPU_FAN Smart Fan Control [Auto Mode]
Use the CPU_FAN Smart Fan Control option to configure the CPU Smart Fan.
➔
Manual Mode The fan spins at the speed set in Manual Mode
settings.
➔
Auto Mode D
EFAULT
The fan adjusts its speed using Auto Mode
settings.
➔ CPU_FAN Start Temperature [65]
If the CPU temperature is higher than this setting, CPU_FAN will start faster. Use the + or
– key to change the value or enter a decimal number between 1 and 100.
➔ CPU_FAN Off Temperature [55]
If the CPU temperature is lower than the value set this option, the fan speed change to be
lowest. To set a value, Use the + or
– key to change the value or enter a decimal number
between 1 and 100.
➔ CPU_FAN Start PWM [30]
Use the CPU_FAN1 Start PWM option to set the PWM start value. Use the + or
– key to
change the value or enter a decimal number between 1 and 100.
➔ FAN2 Smart Fan Control [Auto Mode]
Use the FAN2 Smart Fan Control option to configure the CPU Smart Fan.
➔
Manual Mode The fan spins at the speed set in Manual Mode
settings.
➔
Auto Mode D
EFAULT
The fan adjusts its speed using Auto Mode
settings.
➔ FAN2 Start Temperature [50]
If the System temperature2 is higher than this setting, FAN2 will start faster. Use the + or
–
key to change the value or enter a decimal number between 1 and 100.