IEI Technology DRPC-124-EHL Series, User Manual

Page: 62 / 109

DRPC-124-EHL
Page 50
5.1 Introduction
The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to
certain system settings. This chapter outlines the options that can be changed.
NOTE:
Some of the BIOS options may vary throughout the life cycle of the
product and are subject to change without prior notice.
5.1.1 Starting Setup
The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Using keyboard : Press the DEL or F2 as soon as the system is turned on
.
2. Using touchscreen : Press the Setup button on the upper right corner of the
BIOS Starting Menu.
If the message disappears before the DEL or F2 key is pressed, restart the computer and
try again, then the BIOS Starting Menu will appear. Select "Setup" and press Enter to get
into the BIOS Setup.
Figure 5-1: BIOS Starting Menu