IEI Technology DRPC-120-BTi, User Manual

Page: 107 / 118

DRPC-120-BTi Embedded System
Page 95
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
DRPC-120-BTi may result in permanent damage to the DRPC-120-BTi
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the DRPC-120-BTi. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the DRPC-120-BTi is opened and any of the electrical
components are handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.

Self-grounding : Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.

Use an anti-static pad : When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.

Only handle the edges of the electrical component : When handling the
electrical component, hold the electrical component by its edges.
B.1.3 Explanation of Graphical Symbols
This symbol warns the user that the part has this symbol is hot. Therefore, it is
dangerous to make any kind of contact with this part.
This symbol alerts the user that important information concerning the operation
and maintenance of this unit has been included. Therefore, the information
should be read carefully in order to avoid any problems.