IEI Technology DRPC-100, User Manual, Page: 81 / 160

DRPC-100 Embedded System
Page 67

Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
D
EFAULT
Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.
5.6 Security
Use the Security menu ( BIOS Menu 17 ) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length 20
Administrator Password
User Password
Set Administrator
Password
---------------------

: Select Screen
 
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 17: Security

Administrator Password
Use the Administrator Password to set or change an administrator password.

User Password
Use the User Password to set or change a user password.