IEI Technology DRPC-100, User Manual, Page: 119 / 160

DRPC-100 Embedded System
Page 105
Figure A-9: Press Any Key to Continue
Step 7: Eject the recovery CD. S tep 0 :
A.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1: Turn on the system. When the following screen displays (
776H776H
Figure A-10 ), press
the < F3 > key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.
Figure A-10: Press F3 to Boot into Recovery Mode
Step 2:
The recovery tool menu appears. Type < 4 > and press < Enter >. (
777H777H
Figure A-11 )