IEI Technology DRPC-100, User Manual

Page: 105 / 160

DRPC-100 Embedded System
Page 91
7.3.7 USB 2.0 Connectors (LAN/USB1, LAN/USB2)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 10 VCC
2 DATA- 11 DATA-
3 DATA+ 12 DATA+
4 GROUND 13 GROUND
Table 7-20: USB 2.0 Connectors (LAN/USB1, LAN/USB2) Pinouts
7.3.8 VGA Connector (VGA1)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC 10 GND
11 NC 12 DDC DAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 7-21: VGA Connector (VGA1) Pinouts
7.4 Jumper Settings
The JP3 and JP4 jumpers are preconfigured for the DRPC-100. Users should not change
these jumpers. It is only for reference.
Jumper Name Label Type
Clear CMOS JP1 3-pin header
CAN-bus 1 long wire transmitting JP3 2-pin header
CAN-bus 2 long wire transmitting JP4 2-pin header
Table 7-22: Jumpers