AFL3-W15C/W19C/W22C-ULT3 Panel PC
Page 72
Bits per second [115200]
Use the
Bits per second
option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.
9600
Sets the serial port transmission speed at 9600.
19200
Sets the serial port transmission speed at 19200.
57600
Sets the serial port transmission speed at 57600.
115200
D
EFAULT
Sets the serial port transmission speed at 115200.
Data Bits [8]
Use the
Data Bits
option to specify the number of data bits.
7
Sets the data bits at 7.
8
D
EFAULT
Sets the data bits at 8.
Parity [None]
Use the
Parity
option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
None
D
EFAULT
No parity bit is sent with the data bits.
Even
The parity bit is 0 if the number of ones in the data
bits is even.
Odd
The parity bit is 0 if the number of ones in the data
bits is odd.
Mark
The parity bit is always 1. This option does not
provide error detection.
Space
The parity bit is always 0. This option does not
provide error detection.
Summary of Contents for AFL3-W22C-ULT3
