IEI Technology AFL3-W15C-ADLP User Manual Download Page 66

Page: 66 / 156

AFL3-W15C/W19C/W22C-ADLP

Page 50

4.1

Introduction

The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to

certain system settings. This chapter outlines the options that can be changed.

NOTE:

Some of the BIOS options may vary throughout the life cycle of the

product and are subject to change without prior notice.

4.1.1

Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

Using keyboard

: Press the

DEL

as soon as the system is turned on

Using touchscreen

: Press the

Setup

button on the upper right corner of the

BIOS Starting Menu.

If the message disappears before the

DEL

key is pressed, restart the computer and

try again, then the BIOS Starting Menu will appear. Select "Setup" and press Enter to get

into the BIOS Setup.

Figure 4-1:BIOS Starting Menu

Summary of Contents for AFL3-W15C-ADLP





























































































































































Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands

IEI Technology AFL3-W15C-ADLP, User Manual

Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands