IEI Technology AFL3-W15C-ADLP User Manual Download Page 57

Page: 57 / 156

AFL3-W15C/W19C/W22C-ADLP

Page 41

Figure 3-24: Install into a Rack/Cabinet

Step 7:

Once the panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet.

NOTE:

The rack mounting kit described in this section is an optional item. To

purchase it, please contact an IEI sales representative.

3.9.4

Arm Mounting

The AFL3-W15C/W19C/W22C-ADLP is VESA (Video Electronics Standards Association)

compliant and can be mounted on an arm with a 75 mm or a 100 mm interface pad. To

mount the AFL3-W15C/W19C/W22C-ADLP on an arm, please follow the steps below.

Summary of Contents for AFL3-W15C-ADLP





























































































































































Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands

IEI Technology AFL3-W15C-ADLP, User Manual

Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands