IEI Technology AFL3-W15B-H81, User Manual

Page: 74 / 138

AFL3-W15B-H81 Panel PC
Page 60
Î
IO=3F8h;
IRQ=3, 4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4
Î
IO=2C0h;
IRQ=3, 4
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ3, 4
Î
IO=2C8h;
IRQ=3, 4
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ3, 4
Î
Device Mode [RS232]
The
Device Mode
option is used to set the Serial Port 1 signaling mode.
Î
RS232 D
EFAULT
Enables serial port RS-232 support.
Î
RS422/
RS485
Enables serial port RS-422/485 support.
NOTE:
The COM1_SEL1 jumper should have the same settings as set in this BIOS
option. Refer to
Section 3.8
for the detailed jumper settings.
4.3.7.1.2 Serial Port 2 Configuration
Î
Serial Port [Enabled]
Use the
Serial Port
option to enable or disable the serial port.
Î
Disabled
Disable the serial port
Î
Enabled D
EFAULT
Enable the serial port
Î
Change Settings [Auto]
Use the
Change Settings
option to change the serial port IO port address and interrupt
address.