IEI Technology AFL3-W10A-AL, User Manual

Page: 53 / 145

AFL3-W10A/12A/W15A-AL Panel PC
Page 39
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes ( Figure 3-22 ).
Ensure that all four of the mounting screws fit snugly into their respective slotted
holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 3-22: Chassis Support Screws
Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting
bracket ( Figure 3-23 ).