IEI Technology AFL3-W07A-BT-N1, User Manual

Page: 47 / 109

AFL3-W07A-BT-N1 Panel PC
Page 35
3.9 Reset the System
The reset button enables user to reboot the system when the system is turned on. The
reset button location is shown in Figure 3-24 . Press the reset button to reboot the system.
Figure 3-24: Reset Button Location
3.10 Clear CMOS
If the AFL3-W07A-BT-N1 fails to boot due to improper BIOS settings, the clear CMOS
jumper clears the CMOS data and resets the system BIOS information. To do this, push
the clear CMOS button for three seconds, then restart the system. The clear CMOS button
location is shown in Figure 3-25 .
Figure 3-25: Clear CMOS Button Location