IEI Technology AFL2-W19A-H61 Series, User Manual, Page: 257 / 279

AFL2-W19A/AB-H61 P a n e l P C
P a g e 237
C.4 S e tu p P ro c e d u re fo r Lin u x
The initial setup procedure for Linux system is mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.
S te p 1:
Hardware and BIOS setup . Refer to Section C.2.1 .
S te p 2: Install Linux operating system . Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.
NOTE:
If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3,
the Symantec Ghost may not function properly.
While installing Linux OS, please create two partitions:

Partition 1: /

Partition 2: SWAP
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.
Figure C-29: Partitions for Linux