IEI Technology AFL2-W15A-N270 Page 40 User Manual Download

Page: 40 / 141

AFL2-W15A-N270 Panel PC

Page 28

2.8 Mounting the System

WARNING!

The panel PC is very heavy. Two or more people should mount the

panel PC. Dropping or bumping the panel PC during installation can

cause serious or irreparable damage to the panel PC.

The following installation options are available:

Arm

mounting

Panel

mounting

Stand

mounting

Wall

mounting

The installation instructions are included with the stand, arm or mount.

2.8.1 Arm Mounting

The AFL2-W15A-N270 is VESA (Video Electronics Standards Association) compliant and

can be mounted on an arm with a 100 mm interface pad. To mount the AFL2-W15A-N270

on an arm, please follow the steps below.

Step 1:

The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

NOTE:

When purchasing the arm please ensure that it is VESA compliant and

that the arm has a 100 mm interface pad. If the mounting arm is not

VESA compliant it cannot be used to support the AFL2-W15A-N270.

Summary of Contents for AFL2-W15A-N270














































































































































Search results

Summary of Contents for AFL2-W15A-N270

Reviews:

Related manuals for AFL2-W15A-N270

Brands by name

Popular brands

IEI Technology AFL2-W15A-N270, User Manual

Search results

Summary of Contents for AFL2-W15A-N270

Reviews:

Related manuals for AFL2-W15A-N270

Brands by name

Popular brands