IEI Technology AFL2-17AB-H61 Series, User Manual, Page: 63 / 178

AFL2-17AB-H61
P a g e 47
Pin Description Pin Description
17 GND 18 +5V_HDMI
19 HDMI_HPD
Table 4-1: HDMI Pinouts
4.14.3 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
S te p 1:
Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 1 .
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the AFL2-17AB-H61. See Figure 4-27 .
Figure 4-27: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.