IEI Technology AFL2-17AB-H61 Series, User Manual

Page: 111 / 178

AFL2-17AB-H61
P a g e 95
S te p 2: Lift the aluminum cover off the AFL2-17AB-H61.
S te p 3: The internal parts will all be viewable.
Figure 6-3: Internal Components
6.5 Re p la c in g Co m p o n e n ts
6.5.1 Me m o ry Mo d u le Re p la c e m e n t
The flat bezel panel PC is preinstalled with two 2.0 GB DDR3 memory module. If the
memory module fails, follow the instructions below to replace the memory module.
S te p 1:
Follow all anti-static procedures. See Section 6.2 .
S te p 2: Turn off the power. See Section 6.3 .
S te p 3: Remove the back cover. See Section 6.4.1 above.
S te p 4:
Remove the internal aluminum back cover. See Section 6.4.2 above.
S te p 5: Locate the DDR3 SO-DIMM on the motherboard.
S te p 6:
Remove the DDR3 memory module by pulling both the spring retainer clips
outward from the socket.
S te p 7:
Grasp the DDR3 memory module by the edges and carefully pull it out of the
socket.