IEI Technology AFL2-12A-D525 Series, User Manual

Page: 41 / 180

AFL2-12A-D525 Series Panel PC
Page 41
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL2-12A-D525 may result in permanent damage to the
AFL2-12A-D525 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL2-12A-D525. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL2-12A-D525 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the AFL2-12A-D525, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL2-12A-D525.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.
4.2 Installation Precautions
When installing the flat bezel panel PC, please follow the precautions listed below:

Power turned off : When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.