IEI Technology AFL2-12A-D525 Series, User Manual

Page: 30 / 180

AFL2-12A-D525 Series Panel PC
Page 30
2.3.1 Memory Support
2.3.1.1 Installed Memory
One 204-pin 1.0 GB 800 MHz DDR3 SO-DIMM is installed in the AFL2-12A-D525 and
controlled by the Intel® Atom™ D525 CPU installed on the internal motherboard.
2.3.2 Storage Capacity
The AFL2-12A-D525 comes equipped with a CompactFlash® Type II (CF Type II)
memory disk slot. The AFL2-12A-D525 also supports a 2.5” SATA HDD drive bay which
can be easily accessed by removing two screws on the HDD cover.
2.4 External Peripheral Interface Connectors
The following section describes the external peripheral interface connectors on the bottom
panel of the subsystem.
2.4.1 Serial Port Connectors
The AFL2-12A-D525 has three serial ports. COM1 and COM3 support only RS-232 serial
communications. The other serial port (COM6) can be configured as an RS-422 or
RS-485 serial port. Enabling COM devices to be powered through the COM port
eliminates unnecessary and messy cabling.
Figure 2-3: COM Ports