IEI Technology AFL-xxx-9103, User Manual, Page: 60 / 203

AFL-xxx-9103 Panel PC
Page 42
3.1 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:
Power turned off : When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers : Only certified engineers should install and modify
onboard components.
Mounting : The flat panel PC is a heavy device. When mounting the system
onto a rack, panel, wall or arm please make sure that at least two people are
assisting with the procedure.
Anti-static Discharge : If a user opens the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.2 Preinstalled Components
The following components are all preinstalled.
Motherboard
TFT LCD screen
1.0 GB DDR2 memory module
Resistive type touch screen
Wireless LAN module
Bluetooth module
Power switch
Preinstalled OEM customizations may include the following.
Different DDR2 memory module
Hard disk drive
HSDPA module
Installation of some of the components is described in the following sections.