IEI Technology AFL-xxA-N26 User Manual Download

Page: 97 / 152

AFL-xxA-N26 Series Panel PC

Page 97

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

VGA

LAN

Audio

Touch

screen

Wireless

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD-ROM that came with the system into a CD-ROM drive attached to

the system.

Step 2:

The list of drivers in

Figure 6-1

appears.

Summary of Contents for AFL-xxA-N26

























































































































































Search results

Summary of Contents for AFL-xxA-N26

Reviews:

Related manuals for AFL-xxA-N26

Brands by name

Popular brands

IEI Technology AFL-xxA-N26, User Manual

Search results

Summary of Contents for AFL-xxA-N26

Reviews:

Related manuals for AFL-xxA-N26

Brands by name

Popular brands