IEI Technology AFL-W19A User Manual Download Page 76

Page: 76 / 138

AFL-W19A/W19B/17D/W15A-GM45 Panel PC

Page 64

Hit ‘DEL’ Message Display [Enabled]

Use the

Hit “DEL” Message Display

option to specify whether the instruction to hit the

delete button to enter BIOS during POST appears or not.

Disabled

No message displayed during POST

Enabled D

EFAULT

Displays “

Press DEL to run Setup

” message in

POST

Interrupt 19 Capture [Disabled]

Use the

Interrupt 19 Capture

option to allow optional ROMs such as network controllers

to trap BIOS interrupt 19.

Disabled D

EFAULT

Does not allow optional ROM to trap interrupt 19

Enabled

Allows optional ROM to trap interrupt 19

Spread Spectrum Mode [Disabled]

The

Spread Spectrum Mode

option can help to improve CPU EMI issues.

Disabled

EFAULT

The spread spectrum mode is disabled

Enabled

The spread spectrum mode is enabled

Summary of Contents for AFL-W19A











































































































































Search results

Summary of Contents for AFL-W19A

Reviews:

IEI Technology AFL-W19A, User Manual, Page: 76 / 138

Search results

Summary of Contents for AFL-W19A

Reviews: