IEI Technology AFL-W10A-N270, User Manual

Page: 64 / 158

AFL-W10A-N270 User Manual
Page 64

Brand String
: Lists the brand name of the CPU being used

Frequency:
Lists the CPU processing speed

FSB Speed
: Lists the FSB speed

Cache L1
: Lists the CPU L1 cache size

Cache L2
: Lists the CPU L2 cache size
4.3.2 IDE Configuration
Use the
IDE Configuration
menu (
5
BIOS Menu 4
) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
IDE Configuration

ATA/IDE Configuration [Compatible]
Legacy IDE Channels [SATA Pri, PATA SEC]
> Primary IDE Master
: [Not Detected]
> Primary IDE Slave : [Not Detected]
> Secondary IDE Master : [Not Detected]
> Secondary IDE Slave : [Not Detected]
Disabled
Compatible
Enhanced

Select Screen
 
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration

ATA/IDE Configurations [Compatible]
Use the
ATA/IDE Configurations
option to configure the ATA/IDE controller.

Disabled
Disables the on-board ATA/IDE controller.

Compatible D
EFAULT
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.

Enhanced
Configures the on-board ATA/IDE controller to be in