IEI Technology AFL-9652 Series User Manual Download Page 85

Page: 85 / 199

Page 67

BIOS Menu 5: IDE Master and IDE Slave Configuration

Type [Auto]

Use the

Type

BIOS option select the type of device the AMIBIOS attempts to boot from

after the Power-On Self-Test (POST) is complete.

Not Installed

BIOS is prevented from searching for an IDE disk

drive on the specified channel.

Auto D

EFAULT

The BIOS auto detects the IDE disk drive type

attached to the specified channel. This setting should

be used if an IDE hard disk drive is attached to the

specified channel.

CD/DVD

The CD/DVD option specifies that an IDE CD-ROM

drive is attached to the specified IDE channel. The

BIOS does not attempt to search for other types of

Summary of Contents for AFL-9652 Series








































































































































































































Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands

IEI Technology AFL-9652 Series, User Manual

Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands