IEI Technology AFL-17D, User Manual

Page: 37 / 151

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 26
Figure 2-11: VGA Connector
Step 4: Secure the connector
. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Step 0:
2.8 Power Connection
The power cable connects the panel PC to the power supply. The power cable is required
for operation of the panel PC.
Step 1:
Connect one end to the panel PC.
Step 2:
Connect the other end to the included power supply
S te p 0 :
2.9 Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
The following drivers can be installed on the system. Each driver is in its own directory on
the driver CD: