IEI Technology AFL-15A-N270, User Manual

Page: 76 / 158

AFOLUX AFL-15A-N270 Panel PC
Page 76
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.
Enhanced
Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only
Only the SATA drives are enabled.
SATA Pri, PATA Sec D
EFAULT
The IDE drives are enabled on the Primary
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
PATA Only
The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the
IDE Configuration
menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
The
IDE Configuration
menu (
6
BIOS Menu 4
) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed BIOS configuration options are selected, the IDE configuration options shown in
Section
6
6.3.2.1
appear.