IEI Technology AFL-08AH-N270-CR, User Manual

Page: 37 / 115

AFL-08AH-N270-CR Panel PC
Page 23
4.2 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:
Power turned off
: When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers
: Only certified engineers should install and modify
onboard functionalities.
Anti-static Discharge
: If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
4.3 Preinstalled Components
The following components are all preinstalled.
Motherboard
TFT LCD screen
1.0 GB DDR2 memory module
Resistive type touch screen
Wireless LAN module
CF card
Component installation is described in
the following sections.
4.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the flat panel PC
Step 2:
Configure the system
Step 3:
Connect peripheral devices to the bottom panel of the flat panel PC
Step 4:
Mount the flat panel PC
Step 0: