IEI Technology AFL-057A-Z510, User Manual

Page: 77 / 122

AFL-057A-Z510/Z530 Panel PC
Page 66
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the AFL-057A-Z510/Z530.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ
Follow the electrostatic precautions
outlined below whenever the
AFL-057A-Z510/Z530 is opened.
ƒ
Make sure the power is turned off and the power cord is disconnected
whenever the AFL-057A-Z510/Z530 is being installed, moved or modified.
ƒ
Do not apply voltage levels that exceed the specified voltage range
.
Doing so may cause fire and/or an electrical shock.
ƒ
Electric shocks can occur
if the AFL-057A-Z510/Z530 chassis is opened
when the AFL-057A-Z510/Z530 is running.
ƒ
Do not drop or insert any objects
into the ventilation openings of the
AFL-057A-Z510/Z530.
ƒ
If considerable amounts of dust, water, or fluids enter the
AFL-057A-Z510/Z530
, turn off the power supply immediately, unplug the
power cord, and contact the AFL-057A-Z510/Z530 vendor.
ƒ
DO NOT
do the following:
o
DO NOT
drop the AFL-057A-Z510/Z530 against a hard surface.
o
DO NOT
strike or exert excessive force onto the LCD panel.
o
DO NOT
touch any of the LCD panels with a sharp object
o
DO NOT
use the AFL-057A-Z510/Z530 in a site where the ambient
temperature exceeds the rated temperature