Chapter 4 Installation
59
Step
3:
Insert the iRIS-2400 module
. Push the module in at a 20º angle
(
Figure 4-7
).
Step
4:
Seat the iRIS-2400 module
. Gently push downwards and the arms
clip into place (
Figure 4-7
).
4.7 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size or half-size PCIe
Mini card. To install a full-size PCIe Mini card, please follow the steps below.
Step
1:
Locate the PCIe Mini card slot
. See
Chapter 3
.
Step
2:
Remove the retention screw
. Remove the retention screw as
shown in
Figure 4-8
.
Figure 4-8: Removing the Retention Screw
Step
3:
Insert into the socket at an angle
. Line up the notch on the card
with the notch on the slot. Slide the PCIe Mini card into the socket at an angle
of about 20º (
Figure 4-9
).
