IEI Technology 895X0XX, User Manual

Page: 39 / 113

IDS-300-BW Digital Signage Player
Page 25
3.7.1 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The IDS-300-BW embedded system turns on automatically when the power
is connected. The AT mode benefits a production line to control multiple systems from a
central management center and other applications including:
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
3.7.2 ATX Power Mode
With the ATX mode selected, the IDS-300-BW embedded system goes in a standby mode
when it is turned off. The embedded system can be easily turned on via network or a
power switch in standby mode. Remote power control is perfect for advertising
applications since the broadcasting time for each embedded system can be set
individually and controlled remotely. Other possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.8 Mounting the System
To mount the IDS-300-BW onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1:
Turn the embedded system over.
Step 2:
Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.
Step 3:
Secure the brackets to the system by inserting two retention screws into each
bracket.